Ten-gigabit Ethernet used to be a data-center luxury. In November 2026, you can put real 10G ports on your desk for under $100 — but only if you read the listing carefully. Most switches sold as “10G” at this price have just one or two 10-gigabit ports, with the rest running at 2.5G or even 1G.
This guide only recommends switches with at least one genuine 10-gigabit port — 10GBASE-T copper (RJ45) or 10G SFP+ — and every price below is a November 2026 snapshot. Prices on budget networking gear move fast, so check the current price on Amazon before buying.
Quick Picks
| Switch | 10G Ports | Other Ports | Switching Capacity | Price (Nov 2026) | Best For |
|---|---|---|---|---|---|
| NICGIGA S25-0402T | 2 x 10G RJ45 | 4 x 2.5G | 60 Gbps | $79.99 | Best overall |
| TRENDnet TEG-S762 | 2 x 10G RJ45 | 4 x 2.5G | 60 Gbps | $89.99 | Best big-brand pick |
| TRENDnet TEG-S350 | 1 x 10G SFP+ | 4 x 2.5G | 25 Gbps | $54.99 | Cheapest 10G uplink |
| TRENDnet TEG-S562 | 2 x 10G SFP+ | 4 x 2.5G | 60 Gbps | $57.99 | Best SFP+ value |
| YuanLey 7-Port 2.5G Switch | 2 x 10G SFP+ | 5 x 2.5G | 60 Gbps | $77.99 | Most ports under $100 |
How to Choose a 10GbE Switch Under $100
Count the 10G ports, not the total ports
A “6-port 10G switch” with two 10G ports and four 2.5G ports is really a two-device 10G switch. Decide how many devices actually need 10 gigabits: typically a NAS and one workstation, or a NAS and a Wi-Fi 7 access point. Two 10G ports cover that. If you need three or more devices at full 10G, you will not find it under $100 — the cheapest honest five-port all-10G switch, the TP-Link TL-SX105, sells for around $199.99 on Amazon in November 2026.
RJ45 copper vs SFP+ fiber
10GBASE-T RJ45 ports take the Cat6a cables you probably already own, and they auto-negotiate down to 5G, 2.5G, 1G and 100 Mbps. SFP+ ports are cheaper to build, which is why the budget SFP+ switches below cost less — but an SFP+ port needs a DAC cable, fiber with transceivers, or a 10GBASE-T module, and those extras cost $15 to $40 per port. A $58 SFP+ switch can easily become a $100 switch once you buy the modules. If you only have copper cables and copper NICs, buy RJ45.
Switching capacity is the honest spec
Switching capacity tells you whether all ports can run at full speed at once. A 6-port switch with two 10G ports and four 2.5G ports needs 60 Gbps of capacity to be non-blocking, and every pick below meets that bar. Be suspicious of any budget switch that hides this number.
Cables matter more than the switch
10GBASE-T needs Cat6a for a full 100-meter run, though short runs often work on good Cat6, and Cat5e will usually negotiate down to 5G. Budget for a couple of Cat6a patch cables, usually under $10 each.
1. NICGIGA S25-0402T — Best Overall
Specs: 2 x 10GBASE-T RJ45 ports, 4 x 2.5GBASE-T RJ45 ports, 60 Gbps switching capacity, unmanaged, fanless metal case, desktop or wall mount, 12V DC power.
Price checked November 2026: $79.99 on Amazon (as of November 16, 2026, matching its lowest price in the last 50 days). Check the current price on Amazon before buying.
The NICGIGA S25-0402T is the cheapest honest way into 10-gigabit copper networking: two real 10G RJ45 ports for your NAS and your fastest PC, four 2.5G ports for everything else, a 60 Gbps backplane, and a fanless metal case that stays silent on a desk. It auto-negotiates across 100 Mbps, 1G, 2.5G, 5G and 10G, so older devices just connect at their own speed.
At $79.99 it costs about $40 per 10G port, the best per-port math in this guide.
Pros:
– Two genuine 10GBASE-T RJ45 ports — no transceivers or DAC cables to buy
– 60 Gbps switching capacity, so all six ports run at full speed at once
– Fanless and silent, with a metal case and wall-mount option
– $79.99 is the lowest verified Amazon price in this guide
Cons:
– NICGIGA is a budget brand with a shorter track record than TP-Link or TRENDnet
– Unmanaged only — no VLANs, no QoS, no port statistics
– Only two 10G ports
Best for: A NAS plus one workstation at 10G, with the rest of the network at 2.5G.
2. TRENDnet TEG-S762 — Best Big-Brand Pick
Specs: 2 x 10GBASE-T RJ45 ports, 4 x 2.5GBASE-T RJ45 ports, 60 Gbps switching capacity, unmanaged, fanless metal case, wall mountable, lifetime warranty.
Price checked November 2026: $89.99 in catalog listings from an authorized retailer. TRENDnet lists an MSRP of $239.99, and Amazon has listed this switch much higher at times, so check the current price on Amazon before buying.
The TEG-S762 is the same port recipe as our top pick — two 10G copper ports plus four 2.5G ports, 60 Gbps of switching capacity, fanless — but with TRENDnet’s name and lifetime warranty behind it. If a budget Amazon brand on your network makes you nervous, this is the $10 upgrade that buys peace of mind.
On paper the two switches are near-identical and will perform the same in a home lab. The honest reason to pay the extra $10 is support and longevity, not speed. One caveat: the TEG-S762 launched at a $239.99 MSRP and some sellers still list it near $210, so only buy it when you actually see it at or under $100.
Pros:
– Same proven 2 x 10G + 4 x 2.5G layout as the top pick
– TRENDnet lifetime warranty and long-established support
– Fanless, metal, wall-mountable, and genuinely silent
– Full 5-speed auto-negotiation (100M / 1G / 2.5G / 5G / 10G) on the copper ports
Cons:
– Street price varies wildly by seller — sometimes listed over $200
– Only two 10G ports, like every other sub-$100 RJ45 option
Best for: Buyers who want a name-brand switch and a lifetime warranty for $10 more than the budget pick.
3. TRENDnet TEG-S350 — Cheapest 10G Uplink
Specs: 1 x 10G SFP+ uplink port, 4 x 2.5GBASE-T RJ45 ports, 25 Gbps switching capacity, unmanaged, fanless compact metal case, lifetime warranty.
Price checked November 2026: $54.99 on Amazon (as of November 16, 2026; lowest ever $48.99). Check the current price on Amazon before buying.
The TEG-S350 answers a different question: what if you only need one 10G connection? Its single 10G SFP+ port is an uplink — run one fiber or DAC cable from your router, core switch or NAS, and the four 2.5G copper ports serve everything downstream. At $54.99 it is the cheapest way to touch 10-gigabit anything.
Be clear-eyed about the SFP+ port: you cannot plug a Cat6a cable into it. You need a DAC cable (about $15 for a short one) or transceivers, and if your NAS only has a 10GBASE-T copper port, you will also need a 10GBASE-T SFP+ module, which costs $30 or more and runs hot.
Pros:
– $54.99 is the lowest price in this guide by a wide margin
– TRENDnet lifetime warranty on a $55 switch
– Tiny, fanless and silent, with a metal case
– The 10G SFP+ uplink is perfect for hanging an edge switch off a 10G backbone
Cons:
– Only one 10G port, and it is SFP+ — you need a DAC cable or transceivers
– Four 2.5G ports only — no second 10G device
Best for: A single 10G uplink feeding a 2.5G room, especially where the NAS or router already has an SFP+ port.
4. TRENDnet TEG-S562 — Best SFP+ Value
Specs: 2 x 10G SFP+ ports, 4 x 2.5GBASE-T RJ45 ports, 60 Gbps switching capacity, unmanaged, fanless metal case, lifetime warranty.
Price checked November 2026: $57.99 in catalog listings from an authorized retailer. Check the current price on Amazon before buying.
The TEG-S562 is the SFP+ twin of the TEG-S762: same six ports, same 60 Gbps backplane, same fanless metal box and lifetime warranty — but the two 10G ports are SFP+ cages instead of copper RJ45, cutting the price from $89.99 to $57.99. If your 10G devices already speak SFP+, this is the best value in the guide.
The catch is the same as the TEG-S350’s, doubled: every copper 10G device needs a 10GBASE-T SFP+ module at roughly $30 a pop, and those modules run hot. Two SFP+ DAC cables to SFP+-equipped devices: the TEG-S562 wins easily. Two copper 10G devices that need modules: the $57.99 switch becomes a $118 switch, and the NICGIGA S25-0402T at $79.99 with native copper ports is cheaper.
Pros:
– Two 10G SFP+ ports plus four 2.5G ports for $57.99
– 60 Gbps switching capacity — fully non-blocking
– TRENDnet lifetime warranty, fanless metal case
– Ideal if your NAS and router already have SFP+ ports
Cons:
– SFP+ ports need DAC cables, fiber, or pricey 10GBASE-T modules for copper devices
– No RJ45 10G ports at all
Best for: Homelabs where the NAS, server and router already have SFP+ ports.
5. YuanLey 7-Port 2.5G Switch — Most Ports Under $100
Specs: 2 x 10G SFP+ ports, 5 x 2.5GBASE-T RJ45 ports, 60 Gbps switching capacity, unmanaged, fanless metal case, desktop or wall mount.
Price checked November 2026: $77.99 in catalog listings from an authorized retailer. Check the current price on Amazon before buying.
The YuanLey 7-port switch is the port-count champion here: seven ports instead of six, with two 10G SFP+ uplinks and five 2.5G copper ports. That extra 2.5G port matters in a crowded setup.
YuanLey is a budget Amazon brand in the same class as NICGIGA, so the warranty will not match TRENDnet’s lifetime coverage. But the hardware recipe is sound, and if you need the extra 2.5G port and your 10G links are SFP+, this is the roomiest sub-$100 switch we found.
Pros:
– Seven ports — one more 2.5G port than any other pick here
– Two 10G SFP+ ports with a full 60 Gbps backplane
– $77.99 undercuts the big-brand 6-port switches
– Fanless metal case, wall-mountable
Cons:
– Budget brand with limited warranty and support history
– Both 10G ports are SFP+ — copper devices need modules or DAC cables
Best for: Crowded desks and small homelabs that need the maximum number of 2.5G ports plus two 10G uplinks.
What to Avoid
Switches that say “10G” but mean 10 Gbps of total switching capacity. A five-port gigabit switch has 10 Gbps of switching capacity and some listings dress that up as “10G.” If the listing does not name a 10GBASE-T or SFP+ port, there is no 10-gigabit port in the box.
The QNAP QSW-1105-5T, if you want 10G. It is a good switch — five 2.5GbE ports, fanless, well built, around $109 — but it has zero 10-gigabit ports. It shows up constantly in “10GbE switch” searches because retailers lump 2.5G and 10G together.
Paying $200 for a “budget” 5-port 10G switch. The TP-Link TL-SX105 is the cheapest five-port all-10G copper switch from a major brand, and it sells for around $199.99 on Amazon in November 2026. It is a genuinely good switch — five 10GBASE-T ports, 100 Gbps capacity, fanless, lifetime warranty — but it is not a sub-$100 switch, and any listing that prices it under $100 is either a different model or a marketplace trap. The same goes for the TRENDnet TEG-S750 (five 10G ports, MSRP $354.99, street price around $267 and up) and the Zyxel XGS1010-12 (two 10G SFP+ ports, around $205).
10GBASE-T SFP+ modules from no-name sellers. If you buy an SFP+ switch and need copper, a cheap module can negotiate at 1G, overheat, or simply not link. Budget $30-plus per module from a known-compatible source, or sidestep the problem with a native RJ45 switch.
Managed switches under $100. They exist, mostly as old enterprise gear or white-label boxes, and they are almost never worth it: loud fans, high power draw, outdated firmware, and no warranty.
FAQs
Is a 10GbE switch under $100 actually 10 gigabits?
Yes — but only on the ports that say 10G. Every pick here has at least one genuine 10-gigabit port, verified from the manufacturer’s spec sheet. What you do not get under $100 is five 10G ports: the realistic options are two 10G ports plus four or five 2.5G ports, or one 10G uplink.
Do I need Cat6a cables for 10GbE?
For a full 100-meter run, yes. For short patch cables in a home setup, good-quality Cat6 usually sustains 10G, and Cat5e will typically fall back to 5G rather than failing. Cat6a patch cables cost under $10 each.
SFP+ or RJ45 — which 10G port should I choose?
RJ45 if your devices have copper 10G ports (most NAS units, 10G PCIe NICs, and Wi-Fi 7 routers with 10G ports). SFP+ if your devices already have SFP+ ports or you are comfortable with DAC cables and fiber. SFP+ switches are cheaper, but the transceivers and modules can erase the saving — count the total cost first.
Will a 10G switch make my internet faster?
No. A 10G switch speeds up traffic inside your home network — NAS transfers, PC-to-PC file copies, local backups — not your internet connection, which is limited by your ISP plan.
Verdict
The NICGIGA S25-0402T is the best 10GbE network switch under $100 for most people: two real 10G copper ports, four 2.5G ports, a non-blocking 60 Gbps backplane, silent fanless operation, and a verified $79.99 Amazon price in November 2026. It needs nothing extra — no transceivers, no DAC cables, no modules — just Cat6a patch cables.
If you would rather buy from an established brand, the TRENDnet TEG-S762 is the same switch with a lifetime warranty for about $10 more, provided you find it at its $89.99 catalog price. And if your NAS and router already have SFP+ ports, the TRENDnet TEG-S562 at $57.99 is the cheapest way to get two 10G links.
One honest note before you buy: under $100 buys you two 10G ports, not five. If you need three or more devices at full 10-gigabit speed, save up for the TP-Link TL-SX105 at around $199.99 instead of buying a second cheap switch.
As an Amazon Associate, we earn from qualifying purchases.
Suggested Internal Links
- Best 2.5GbE Network Switch Under $100
- Best 2.5GbE Network Switch Under $200
- Best Wi-Fi 7 Router Under $500
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.