Key takeaways
- Find the best HDMI splitters for mirroring one source to two or four displays. Compare 4K resolution, HDCP, EDID, and power needs before you buy.
An HDMI splitter takes one HDMI source and sends the same picture and sound to two or more displays at the same time. It does not extend a computer desktop, does not show different content on each screen, and does not choose between several sources. Every display shows the same image, from the same source, in step.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Quick Answer
- How to Choose an HDMI Splitter
- OREI UHDS-102
- OREI UHD-Pro 102
- Avedio Links 4K HDMI Splitter 1 in 2 Out
- Mt-Viki 4K HDMI Splitter 1 in 2 Out
- Enbuer 1×4 HDMI Splitter
- How the Five Splitters Compare
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
Quick Answer
For most two-display setups, the OREI UHDS-102 is the straightforward pick. It copies one HDMI input to two outputs at up to 4K at 60Hz, with 18 Gbps of bandwidth, HDMI 2.0, and HDCP 2.2 support. If one display is 4K and the other is 1080p, the OREI UHD-Pro 102 is the better fit, because it supports automatic downscaling, so the 4K display can stay at 4K while the 1080p display receives a 1080p signal. For a simple budget setup where 4K at 30Hz is enough, the Avedio Links splitter and the Mt-Viki splitter both mirror one source to two displays. For four displays, the Enbuer 1×4 splitter sends one source to four outputs at up to 4K at 30Hz.
How to Choose an HDMI Splitter
Start with the number of outputs. A 1-in-2-out splitter, often written as 1×2, suits a television and a monitor, a television and a projector, or two televisions in adjoining rooms. A 1-in-4-out splitter, or 1×4, suits a shop, bar, classroom, or office where several screens show the same presentation, menu, match, or film.
Next, match the maximum resolution and refresh rate to your source and displays. Many budget splitters top out at 4K at 30Hz, which is fine for films, presentations, and most streaming, but less smooth for fast games. A 4K at 60Hz splitter is the safer choice for a modern console, a recent streaming device, or a 4K Blu-ray player.
HDCP is the copy-protection handshake between a source and a display. Streaming services and protected discs commonly require HDCP 2.2 for 4K playback. A splitter limited to HDCP 1.4 can force the source to drop to 1080p, or show no picture at all, even when the displays support 4K.
Power is a practical detail that causes many setup problems. Most powered splitters need a wall adapter or a USB power source, and the listing should state what is included.
OREI UHDS-102
The OREI UHDS-102 is the most straightforward 4K at 60Hz choice in this roundup. It is a powered 1-in-2-out splitter that takes one HDMI 2.0 signal and duplicates it to two HDMI displays at the same time. OREI describes it as a distribution amplifier, which is the technical term for a powered splitter that strengthens the signal as it copies it.
The Amazon listing names HDMI 2.0b and HDCP 2.2, so protected 4K content from a streaming device, console, or disc player should pass through without the forced drop to 1080p that an HDCP 1.4 splitter can cause. OREI states plainly that the unit duplicates the source and cannot extend a desktop for a PC or laptop. If the two displays do not support the same resolution, the splitter lowers the output to the best resolution supported by both displays, and the same applies to audio. The unit measures 4 by 2.25 by 0.6 inches, and a power supply is included.
Specs
| Specification | Detail |
|---|---|
| Configuration | 1 input, 2 outputs |
| Maximum resolution | 4K at 60Hz |
| Bandwidth | 18 Gbps |
| HDMI version | HDMI 2.0 |
| HDCP version | HDCP 2.2 |
| Colour format | 4:4:4, 8-bit |
| EDID management | Not stated |
| Power | Power supply included |
| Dimensions | 4 by 2.25 by 0.6 inches |
| Best for | Two matched 4K displays |
OREI UHD-Pro 102
The OREI UHD-Pro 102 is the premium pick in this roundup, and its advantage is specific: automatic downscaling. It is a 1-in-2-out splitter that supports resolutions up to 4K at 60Hz and is HDMI 2.0 and HDCP 2.2 compliant. The listing states that the auto-downscaling function lets you connect a 4K display and a 1080p display at the same time, maintaining 4K resolution on the 4K display and downscaling the media to 1080p for the 1080p display.
The listing also names advanced EDID management and 3D support. EDID management helps the source and the displays agree on resolution and audio, and it is useful when a projector, a sound system, and a television do not all report the same capabilities. The unit mirrors only, so it duplicates one source to two displays and does not extend a desktop or switch between sources. This is the splitter to choose when the two displays are not a matched pair, such as a new 4K television and an older 1080p television in another room. The unit measures 2.5 by 4 by 0.75 inches.
Specs
| Specification | Detail |
|---|---|
| Configuration | 1 input, 2 outputs |
| Maximum resolution | 4K at 60Hz |
| Bandwidth | Not stated |
| HDMI version | HDMI 2.0 |
| HDCP version | HDCP 2.2 |
| Downscaling | Automatic 4K to 1080p |
| EDID management | Advanced EDID management |
| 3D support | Yes |
| Dimensions | 2.5 by 4 by 0.75 inches |
| Best for | Mixed 4K and 1080p displays |
Avedio Links 4K HDMI Splitter 1 in 2 Out
The Avedio Links 4K splitter is the budget pick for a simple two-display mirror. It is a powered 1-in-2-out splitter that duplicates one HDMI input to two displays at the same time, carrying video and audio to both. The listing states a maximum resolution of 4K at 30Hz, with 1080p at 50Hz or 60Hz and a range of lower resolutions below that. For films, streaming, presentations, and casual viewing, 4K at 30Hz is a workable ceiling. For fast games or fast motion at 4K, a 4K at 60Hz model is the better choice.
The listing is clear about what this splitter does not do. It does not extend a display, does not switch between two sources, and does not extract audio to a separate speaker or soundbar. It mirrors only. It supports HDMI versions 1.3 and 1.4, and HDCP 1.4, and the listing states that it is not compatible with HDCP 2.2.
The package lists one splitter measuring 2.48 by 2.05 by 0.51 inches, one 4-foot high-speed HDMI cable, and one 2.6-foot USB power cable. A power adapter is not included, so a suitable wall adapter is needed, and the listing advises connecting a 5V 1A adapter to keep performance stable and avoid flicker or a lost signal.
Specs
| Specification | Detail |
|---|---|
| Configuration | 1 input, 2 outputs |
| Maximum resolution | 4K at 30Hz |
| 1080p support | 1080p at 50Hz or 60Hz |
| HDMI version | HDMI 1.3 and 1.4 |
| HDCP version | HDCP 1.4, not HDCP 2.2 |
| Included cable | 4-foot HDMI cable |
| Power | USB cable included, adapter not included |
| Dimensions | 2.48 by 2.05 by 0.51 inches |
| Audio formats | DTS-HD, Dolby TrueHD, LPCM 7.1 |
| Best for | Budget two-display mirroring |
Mt-Viki 4K HDMI Splitter 1 in 2 Out
The Mt-Viki splitter is another budget 1-in-2-out model, and its listing is unusually direct about the category. It states that this is not an HDMI switch, that it cannot support several input devices feeding one television, and that it cannot extend a screen. It is a splitter only, and it supports one HDMI input feeding two televisions or monitors with the same content. That plain statement helps buyers avoid the most common mistake in this category, which is buying a splitter when a switch was needed, or the reverse.
The published resolution is 4K at 30Hz, with 1080p at 60Hz and 720p at 60Hz below that. Bandwidth is listed at 10.2 Gbps, which matches the 4K at 30Hz ceiling and the HDMI 1.4 generation of the device. Compatibility is listed as HDMI 1.4, 1.3, and 1.2, with HDCP 1.4. Unprotected sources, older consoles, set-top boxes, presentation laptops, and 1080p viewing are a better fit.
The unit is powered and supplied with a power adapter, which removes the guesswork about USB power that affects some budget splitters. The listing describes plug-and-play use with no drivers, and it notes that the input and output devices and the HDMI cable must support 4K for a 4K picture to appear.
Specs
| Specification | Detail |
|---|---|
| Configuration | 1 input, 2 outputs |
| Maximum resolution | 4K at 30Hz |
| 1080p support | 1080p at 60Hz |
| Bandwidth | 10.2 Gbps |
| HDMI version | HDMI 1.4, 1.3, and 1.2 |
| HDCP version | HDCP 1.4 |
| Power | Power adapter included |
| Setup | Plug and play, no drivers |
| 3D support | Yes |
| Best for | Budget two-display mirroring |
Enbuer 1×4 HDMI Splitter
The Enbuer 1×4 splitter is the four-output pick in this roundup. It takes one HDMI input and distributes it to four identical HDMI outputs at the same time, so four displays can show the same picture and sound. The listing repeats the point in several places: this is a mirror-only splitter, not a switch, and each screen shows the same page.
The published maximum resolution is 3840 by 2160 at 30Hz, which is 4K at 30Hz, with 3D support. HDMI version is listed as 1.4, with a later line in the listing naming 1.4b, and HDCP is listed as 1.3.
Cable guidance is published and worth following. The listing states support for AWG 26 HDMI cable with input up to 15 metres and output up to 15 metres, and with input up to 8 metres and output up to 8 metres when the resolution is 4K. The unit measures 3.78 by 2.44 by 0.87 inches, and the model number is Max-376.
Specs
| Specification | Detail |
|---|---|
| Configuration | 1 input, 4 outputs |
| Maximum resolution | 4K at 30Hz |
| HDMI version | HDMI 1.4 |
| HDCP version | HDCP 1.3 |
| 3D support | Yes |
| ARC support | No |
| Cable guidance | AWG 26, up to 8 metres at 4K |
| Dimensions | 3.78 by 2.44 by 0.87 inches |
| Model | Max-376 |
| Best for | Four displays showing one source |
How the Five Splitters Compare
The choice comes down to three questions: how many displays, what resolution, and whether the displays match. For two matched 4K displays, the OREI UHDS-102 gives 4K at 60Hz, 18 Gbps, HDMI 2.0, and HDCP 2.2 in a compact powered unit. For two displays that do not match, the OREI UHD-Pro 102 keeps the same 4K at 60Hz ceiling and adds automatic downscaling and advanced EDID management. For a budget two-display setup, the Avedio Links splitter and the Mt-Viki splitter both offer 4K at 30Hz mirroring with HDCP 1.4. The Avedio Links model includes a 4-foot HDMI cable but needs a wall adapter of your own, while the Mt-Viki model includes a power adapter.
Frequently Asked Questions
Can an HDMI splitter extend a computer desktop across two monitors?
No. An HDMI splitter duplicates one source to two or more displays, so every display shows the same image. It cannot create an extended desktop with different content on each monitor.
Do I need a 4K at 60Hz splitter, or is 4K at 30Hz enough?
It depends on the source and the content. A 4K at 60Hz splitter is the safer choice for a modern games console, a recent streaming device, fast video, and smooth desktop motion. A 4K at 30Hz splitter is enough for films, presentations, menus, signage, and casual streaming, where the lower refresh rate is less noticeable.
Why does HDCP matter when choosing an HDMI splitter?
HDCP is the copy-protection handshake between a source and a display. Protected 4K content commonly requires HDCP 2.2, and a splitter limited to HDCP 1.4 can force the source to drop to 1080p or show no picture. If you plan to watch protected 4K films or streaming, choose a splitter that lists HDCP 2.2.
What should I do if one display is 4K and the other is 1080p?
Choose a splitter with automatic downscaling, such as the OREI UHD-Pro 102 in this roundup, so the 4K display can stay at 4K while the 1080p display receives a 1080p signal. A splitter without downscaling usually drops both outputs to the capability of the weaker display.
Conclusion
The best HDMI splitter is the one that matches the number of displays, the resolution, and the HDCP version your setup actually needs. For most two-display setups with matched 4K screens, the OREI UHDS-102 is the straightforward pick, with 4K at 60Hz, 18 Gbps, and HDCP 2.2. For a mixed pair of displays, the OREI UHD-Pro 102 is the better choice, because its automatic downscaling keeps the 4K display at 4K while the 1080p display receives a signal it can handle.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.