Key takeaways
- Compare six picks for the best 4K gaming monitors for PS5 and PC, with HDMI 2.1 notes, refresh rates, panel types and a clear buying guide.
The ASUS TUF Gaming VG27UQ1A is the best all-round 4K gaming monitor in this group for people who split time between a PS5 and a gaming PC. It pairs a 27-inch Fast IPS panel with 160Hz over DisplayPort for the PC and 4K at 120Hz over HDMI 2.1 for the console, which is the ceiling the PS5 can output anyway. “4K” here means a 3840 x 2160 picture, four times the pixels of 1080p, and it only pays off when the monitor, cable and source all agree on the same signal. Below you will find five more screens, two of which are not true 4K and are labeled as runner-ups.
Quick List
- ASUS TUF Gaming VG27UQ1A – best for a PS5 plus PC setup on one 27-inch IPS screen
- ZZA 27 Inch 4K 144Hz – best for a plain, flat 4K panel with HDMI 2.1 and DisplayPort 1.4
- Sceptre Curved 27-inch Prime (180Hz) – runner-up for fast 1080p play, not a 4K monitor
- CRUA 32-inch 4K 160Hz Curved – best for a larger, curved VA screen with built-in speakers
- Sceptre Curved 34-inch Prime (3440 x 1440) – runner-up for ultrawide PC play at high refresh, not 4K
- Amzfast 27-inch 4K Dual Mode – best for switching between sharp 4K and a very fast 1080p mode
Which One Is Right for You?
Start by deciding how much of your play happens on the console and how much on the PC, then choose by size, panel type and the extras you will actually use. The table below maps common situations to a pick.
| If you… | Choose |
|---|---|
| want one monitor for a PS5 and a PC with HDMI 2.1 and G-SYNC Compatible support | ASUS TUF Gaming VG27UQ1A |
| want a larger desk-filling picture at 4K and are fine with a VA panel | CRUA 32-inch 4K Curved |
| like the idea of a 4K desktop that can drop to a fast 1080p mode for competitive games | Amzfast 27-inch 4K Dual Mode |
| want a straightforward 27-inch flat 4K screen with a tilt-only stand | ZZA 27 Inch 4K 144Hz |
| care more about frame rate than sharpness and play at 1080p | Sceptre Curved 27-inch Prime (runner-up) |
| play mostly on PC and want an ultrawide 3440 x 1440 canvas | Sceptre Curved 34-inch Prime (runner-up) |
Whichever route you take, read the input list on the product page before you order, because ports and refresh limits are where the most surprises happen. For most readers the decision starts with the PS5. The console tops out at 4K and 120Hz, so a 160Hz rating only matters on the PC side. If a single screen has to do both jobs, favor the models that clearly list HDMI 2.1 and a 4K panel, then pick the size and panel type you prefer.
All 6 Picks in Detail
1. ASUS TUF Gaming VG27UQ1A – Best for a PS5 plus PC setup
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
This is the most complete 4K package in the list. The listing name states a 27-inch 4K panel at 160Hz with G-SYNC support, ELMB Sync, 1ms response, 95% DCI-P3 coverage, FreeSync Premium and the DisplayWidget Center software. ASUS specification pages describe a Fast IPS panel, HDR10 support, two HDMI 2.1 inputs and a DisplayPort 1.4 input that uses Display Stream Compression to reach 4K at 160Hz. The same specification pages say consoles get 4K at 120Hz over HDMI, which matches what a PS5 can send. It suits a player who wants one screen on a desk for both a console and a graphics card.
- 27-inch, 3840 x 2160, Fast IPS panel
- 160Hz refresh over DisplayPort, 4K at 120Hz over HDMI for consoles
- G-SYNC Compatible plus FreeSync Premium variable refresh
- 95% DCI-P3 color coverage, HDR10 support
- ELMB Sync for reduced motion blur; built-in 2W speakers per the manufacturer page
- Tilt-only stand with VESA mounting per the manufacturer page
Pros
- HDMI 2.1 and DisplayPort cover both console and PC needs
- Wide color coverage for an IPS gaming panel
Cons
- No height adjustment on the stock stand
- One retailer page lists HDMI 2.0, so confirm the port version on the product page
Compared with the ZZA 27-inch, it adds named variable-refresh support for both major GPU vendors and the stronger color claim.
2. ZZA 27 Inch 4K 144Hz – Best for a plain flat 4K panel
The ZZA is a straightforward 27-inch, 3840 x 2160 monitor with a flat screen, a 144Hz rating and Adaptive Sync. The listing name states HDMI 2.1 and DisplayPort 1.4 inputs, tilt adjustment and wall-mount compatibility, which are the basics needed for a PS5 connection and a PC connection. It suits a player who wants a no-frills 4K screen and does not need a curved panel or a long list of branded extras. Because the listing name does not state panel type, brightness or color coverage, those should be confirmed on the product page before you decide.
- 27-inch, 3840 x 2160 (UHD) flat panel
- 144Hz maximum refresh with Adaptive Sync
- HDMI 2.1 and DisplayPort 1.4 inputs
- Tilt-only adjustment; wall-mountable
- Panel type, HDR support and speakers: confirm on listing
Pros
- Lists both modern video inputs a console and PC need
- Flat screen suits reading text and editing alongside gaming
Cons
- Fewer stated features than the ASUS model
- Stand offers tilt only
It is the simpler alternative to the ASUS model, trading the named sync certifications and color figures for a plainer feature list.
3. Sceptre Curved 27-inch Prime (180Hz) – Runner-up for fast 1080p play
This model does not belong with the 4K monitors, so treat it as a runner-up. The listing name highlights 180Hz, a 1500R curve, 1ms response, two DisplayPort and two HDMI inputs, and built-in speakers, but it never states a 4K resolution. Sceptre’s own product page for this series lists a native 1920 x 1080 resolution on a VA panel, with 100% sRGB coverage and HDMI 2.0 and DisplayPort 1.2 inputs. That makes it a frame-rate-first screen: a good fit for a PC player who runs competitive shooters at high refresh and does not mind 1080p. On a PS5 it will work at its native resolution, but you would not be getting 4K output.
- 27-inch curved (1500R) screen
- Native 1920 x 1080 per the manufacturer page; confirm on listing
- Up to 180Hz; 1ms response claim with motion blur reduction
- Two HDMI and two DisplayPort inputs
- Built-in speakers and Adaptive Sync
Pros
- High refresh at a resolution that is easy for any graphics card to drive
- Four video inputs make multi-device setups simple
Cons
- Not 4K, so it misses the point of this list for PS5 owners
- 1080p looks soft at 27 inches compared with 4K
Next to the 34-inch Sceptre, it trades screen width and pixel count for a simpler, more conventional 16:9 shape. If you do consider it, think of it as a second monitor or a dedicated competitive screen, and pair it with a separate 4K display for the games where image quality matters more than speed. Buyers who want one screen for everything should skip ahead to the ASUS, ZZA or Amzfast models instead.
4. CRUA 32-inch 4K 160Hz Curved – Best for a large curved screen
The CRUA is the biggest true 4K screen here. The listing name states a 32-inch, 3840 x 2160 VA panel at 160Hz with a 1500R curve, AMD FreeSync, 120% sRGB, built-in speakers, HDMI 2.1 and DisplayPort 1.4, and a white finish. It suits a player who sits an arm’s length from the screen and wants an immersive, wraparound picture for single-player games. VA panels usually offer deeper contrast than IPS, though they can show more smearing in dark scenes. At 32 inches, 4K works out to a pixel density near 138 pixels per inch, which stays sharp without needing scaling tricks.
- 32-inch, 3840 x 2160 VA panel, 1500R curve
- 160Hz refresh with AMD FreeSync
- 120% sRGB coverage per the listing name
- HDMI 2.1 and DisplayPort 1.4
- Built-in speakers; VESA mount size is partly cut off in the listing name, so confirm on listing
Pros
- Large screen with a gentle curve for immersion
- HDMI 2.1 input for the PS5
Cons
- Takes up more desk depth than a 27-inch
- VA panels can show motion smearing in dark scenes
It is the large-screen counterpart to the ASUS pick, giving up IPS color for size and contrast.
5. Sceptre Curved 34-inch Prime (3440 x 1440) – Runner-up for ultrawide PC play
This monitor is also outside the 4K group. The listing name states a 34-inch curved ultrawide at 3440 x 1440, up to 240Hz, a 1500R curve, 1ms response and 100% sRGB, with two DisplayPort inputs, two HDMI inputs and built-in speakers. Ultrawide 1440p is a different trade from 4K: roughly five million pixels instead of eight, which gives much higher frame rates from the same graphics card. It is a strong match for PC racing and open-world games. For a PS5 it is a poor fit, since consoles output standard 16:9 resolutions and the picture would not fill the panel, so confirm console behavior before you commit.
- 34-inch curved ultrawide, 3440 x 1440
- Up to 240Hz, 1ms response claim
- 100% sRGB coverage
- Two DisplayPort and two HDMI inputs
- Built-in speakers; panel type: confirm on listing
Pros
- Wide field of view for PC games that support 21:9
- Higher frame rates are easier to reach than at 4K
Cons
- Not 4K and not a natural fit for a PS5
- Some games and videos show black bars at 21:9
Compared with the CRUA 32-inch, it offers more width and more refresh but far fewer total pixels. A practical way to think about it: the ultrawide gives you extra peripheral view in racing and flight games, while the CRUA gives you more detail in everything. If the PS5 is your main device, the CRUA or the ASUS is the more sensible direction, and this model stays on the list for PC readers who want the widest possible canvas.
6. Amzfast 27-inch 4K Dual Mode – Best for switching resolution modes
The Amzfast stands out for its dual-mode idea. The listing name states a 27-inch Fast IPS panel running 4K UHD at 160Hz, or a Full HD mode at 320Hz, along with 1ms response, Adaptive Sync, HDR400, 126% sRGB and an HDMI 2.1 input alongside DisplayPort. The idea is to use sharp 4K for single-player and creative work, then switch to a lower resolution and a very high refresh rate for fast shooters on a PC. The “AI gaming features” wording in the listing is a marketing label, so look at the on-screen menu details on the product page. It suits a player who wants flexibility on one 27-inch IPS panel.
- 27-inch Fast IPS panel
- 4K UHD at 160Hz or FHD at 320Hz dual mode
- HDR400 label and 126% sRGB coverage per the listing name
- HDMI 2.1 plus DisplayPort inputs (exact count: confirm on listing)
- 1ms response claim with Adaptive Sync
Pros
- Two operating modes cover both sharpness and speed
- IPS panel with strong sRGB coverage claim
Cons
- Dual mode needs a PC that can output the high-refresh FHD signal
- HDR400 is an entry-level HDR tier with limited impact
Against the ASUS pick, it offers the faster 1080p mode, while the ASUS offers clearer console documentation and G-SYNC Compatible support.
Specs Compared
| Monitor | Size | Resolution | Max refresh | Panel / shape | Video inputs |
|---|---|---|---|---|---|
| ASUS TUF Gaming VG27UQ1A | 27 in | 3840 x 2160 | 160Hz | Fast IPS, flat | HDMI 2.1 and DisplayPort 1.4 |
| ZZA 27 Inch 4K | 27 in | 3840 x 2160 | 144Hz | Flat; panel type confirm on listing | HDMI 2.1 and DisplayPort 1.4 |
| Sceptre Curved 27-inch Prime | 27 in | 1920 x 1080 per maker page | 180Hz | VA per maker page, 1500R curve | 2 HDMI, 2 DisplayPort |
| CRUA 32-inch 4K Curved | 32 in | 3840 x 2160 | 160Hz | VA, 1500R curve | HDMI 2.1 and DisplayPort 1.4 |
| Sceptre Curved 34-inch Prime | 34 in | 3440 x 1440 | 240Hz | Ultrawide, 1500R curve; panel type confirm on listing | 2 HDMI, 2 DisplayPort |
| Amzfast 27-inch 4K Dual Mode | 27 in | 3840 x 2160 (FHD mode available) | 160Hz in 4K, 320Hz in FHD | Fast IPS, flat | HDMI 2.1 and DisplayPort; count confirm on listing |
How We Chose These
We built this shortlist from published specification pages and retailer listing fields, then cross-checked the claims that matter most for a console and a PC. First, we checked that each model states a resolution, a refresh rate and which video inputs it offers, because those three facts decide whether a PS5 and a PC can both run well. Second, we compared panel type, color coverage claims and variable refresh support, treating marketing labels cautiously. Third, we looked at ergonomics such as stand adjustment and wall-mount support. Where a listing name did not state a value, we marked it “confirm on listing.” Two monitors that are not 4K are kept as clearly labeled runner-ups so you can see the difference.
What to Look For
Know what your PS5 can actually output
The PS5 sends 4K at up to 120Hz over HDMI 2.1, and it supports variable refresh rate on displays that advertise it. It does not output above 120Hz, so a 144Hz or 160Hz rating is a PC benefit rather than a console one. Not every game runs at 4K and 120 frames per second either; many titles offer a 60-frame quality mode and a 120-frame performance mode at a lower internal resolution. A monitor with HDMI 2.1 gives you headroom for both, while one limited to older HDMI will cap the console at 4K and 60Hz.
Match the cable and ports to the signal
HDMI 2.1 carries up to 48 Gbps, which is what makes 4K at 120Hz practical. DisplayPort 1.4 carries roughly 32 Gbps of raw bandwidth, and monitors that run 4K above 120Hz usually rely on Display Stream Compression to fit. Use the cable that came in the box or a certified Ultra High Speed HDMI cable for the console, since an older cable can silently fall back to 60Hz. If a monitor lists two HDMI ports, check which ones support the full-speed mode, because not every port on every model matches.
Choose panel type for the games you play
Fast IPS panels tend to give wider viewing angles and strong color, and they are a safe all-round choice. VA panels usually show deeper blacks and higher contrast, which suits dark, atmospheric games, but they can smear fast motion. Response-time claims such as 1ms are measured under favorable settings and are not directly comparable across brands. Treat HDR400 labels with caution, since they indicate entry-level brightness and rarely deliver the dramatic highlights people expect.
Size, resolution and viewing distance
A useful rule of thumb is pixel density. A 27-inch 4K panel has about 163 pixels per inch, a 32-inch 4K panel about 138, and a 34-inch 3440 x 1440 panel about 110. Higher density means sharper text and edges at the same distance. For a desk where you sit 2 to 3 feet away, 27 inches at 4K is crisp and 32 inches is immersive. Worked example: if your graphics card averages 90 frames per second at 4K in your favorite game, a 144Hz or 160Hz panel with variable refresh will keep it smooth, while a 60Hz screen would waste most of those frames.
Using one monitor for two machines
Sharing a screen between a PS5 and a PC works best when the monitor has at least two digital inputs and a quick input switch. Put the console on an HDMI 2.1 port and the PC on DisplayPort so each device gets its own full-speed connection, and keep the console’s HDR and 120Hz settings separate from your Windows display settings. Many monitors also remember a different picture mode for each input, which is handy: a brighter, more saturated mode for the console and a calibrated, neutral mode for desktop work. If you also use a laptop, a USB-C port with video support would be a bonus, but none of the listing names here promise it, so confirm on listing.
Ergonomics and extras
Several of these screens offer tilt only. If you want height or swivel adjustment, plan on a VESA arm, and confirm the mounting pattern, usually 75 x 75 mm or 100 x 100 mm. Built-in speakers are convenient but modest; a headset or desk speakers will sound far better. Finally, check the on-screen menu features such as crosshair overlays, game modes and input labeling, since you will use them every day.
Questions
Can a PS5 run 4K at 120Hz on these monitors?
Yes, on a monitor with a true HDMI 2.1 input and a 4K panel, and only in games that support it. The PS5 tops out at 120Hz, so refresh rates above that apply to a PC. Use a certified Ultra High Speed HDMI cable and enable 120Hz output in the console’s video settings.
Is a curved monitor good for console gaming?
It can be, especially on a 32-inch screen viewed from a desk. A 1500R curve gently wraps the picture around your field of view, which many players find immersive. If several people sit on a couch around the screen, a flat panel keeps the image consistent from every angle.
Do I need G-SYNC or FreeSync for the PS5?
The PS5 uses the HDMI variable refresh rate standard rather than a vendor-specific name. Labels such as FreeSync or Adaptive Sync usually signal that the monitor supports variable refresh, but confirm that it works over HDMI. On a PC, G-SYNC Compatible and FreeSync map to NVIDIA and AMD graphics cards respectively.
Is 4K worth it on a 27-inch monitor?
For most people, yes. It produces very sharp text and detail, and the pixel density is high enough that you may need display scaling in Windows. The trade-off is that your graphics card must render roughly four times the pixels of 1080p, so frame rates drop unless you use upscaling features.
Why are two monitors in this list not 4K?
Their listings advertise high refresh rates, curved screens and ultrawide shapes but not a 4K resolution. We kept them as runner-ups for PC players who prefer speed over sharpness. If 4K for a PS5 is the goal, choose one of the other four.
Which HDMI port should I use on the monitor?
Use the port the manufacturer labels as HDMI 2.1 or full bandwidth. On some monitors only one of two HDMI ports supports the highest refresh rate. The user manual or the specification page will name the right port.
Update History
- October 20, 2026 – Initial publication; product set drawn from current catalog listings.
- Check the product page for current specifications and availability before buying.
Sources
- Manufacturer product and specification pages for ASUS and Sceptre
- Retailer listing titles and specification fields for all six monitors
- Published HDMI and DisplayPort bandwidth figures used for the cable and port guidance
