Key takeaways
- Find the best microphone stands for podcasting, singing, and home recording. Compare five floor stands by height, boom reach, base, and accessories.
A good microphone stand does a simple job well. It holds the microphone at mouth height, keeps it steady while you speak or sing, and stays out of the way when you move. The wrong stand droops, tips over, or forces you to hunch over a microphone that sits too low.
This guide covers floor stands with tripod bases and detachable boom arms. These are not desk-clamp boom arms. Every stand here stands on the floor on its own, so it works beside a desk, on a stage, in a rehearsal room, or in a home studio without needing a suitable desk edge.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
If you want one stand that covers the most situations, choose the InnoGear TS186. It adjusts from 28.1 to 89.8 inches, carries a detachable boom from 16 to 30 inches, and ships with a carrying bag and two microphone clips. For a proven stage classic, the On-Stage MS7701B is the safer pick. For the lowest spend on a tall stand, the Amazon Basics TMS130 reaches 85.75 inches and states a clear microphone weight limit of 2 pounds.
Table of Contents
- Quick Answer
- How to Choose a Microphone Stand
- InnoGear TS186 Tripod Microphone Stand
- On-Stage MS7701B Euro Boom Microphone Stand
- Cahaya CY0239 Tripod Microphone Stand
- Samson MK10 Lightweight Microphone Boom Stand
- Amazon Basics TMS130 Microphone Boom Stand
- Who Should Skip a Floor Microphone Stand
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Microphone Stand
Start with height. A stand for seated podcasting needs a low minimum height, while a stand for a standing singer needs a high maximum height. Check both ends of the range before you buy.
Next, look at the boom. A telescoping boom lets you reach over a guitar, a keyboard, or a desk without moving the base. A fixed boom only changes angle, so the reach is set by its length.
The base decides stability. A tripod base folds flat for transport and gives a wide footprint on a stage floor. Set one tripod leg under the boom when the boom is extended, so the weight of the microphone sits over a leg rather than between two legs.
Check the thread and the box contents. Most stands use a 5/8 inch thread, with a 3/8 inch adapter for European clips and shock mounts. Some stands include a microphone clip, some include two clips, and some include no clip at all.
Finally, match the stand to the microphone weight. Light handheld dynamic microphones suit almost any stand here. A heavy large-diaphragm condenser microphone on a long extended boom needs a heavier stand with a counterweight or a wider base.
InnoGear TS186 Tripod Microphone Stand
The InnoGear TS186 is the most versatile stand in this guide. It adjusts from 28.1 to 89.8 inches, which covers seated podcasting, standing vocals, and overhead positions that shorter stands cannot reach. The detachable boom extends from 16 to 30 inches and rotates, so you can angle the microphone over an instrument or pull it close to a seated speaker without moving the tripod.
The kit is the other reason this stand leads the list. It ships with a carrying bag, two microphone clips, and a 3/8 inch to 5/8 inch adapter. That covers most handheld dynamic microphones and many USB microphones with a standard clip, and the bag makes the stand easy to carry to a rehearsal or a friend’s studio.
Removing the boom converts the TS186 into a straight tripod stand, which suits a straightforward vocal position or a speech setup where a boom would only get in the way.
The trade-off is size and weight. At 4.2 pounds with a tall maximum height, this is not the smallest stand to store in a crowded room. It is a mid-range pick: more capable than a basic tripod, but still a portable floor stand rather than a heavy studio boom with a cast base and wheels.
Specs
| Specification | Details |
|---|---|
| Brand | InnoGear |
| Model | TS186 |
| Base | Tripod with non-slip rubber feet |
| Height range | 28.1 to 89.8 inches |
| Boom length | 16 to 30 inches, detachable |
| Thread | 3/8 inch and 5/8 inch |
| Weight | 4.2 pounds |
| Material | Thickened steel |
| Included | Carrying bag, 2 microphone clips, 3/8 inch to 5/8 inch adapter |
On-Stage MS7701B Euro Boom Microphone Stand
The On-Stage MS7701B is the classic stage stand in this roundup. It has been a familiar sight on stages and in rehearsal rooms for years, and its design is deliberately simple: a steel tripod base, a mid-point locking clutch, a 30 inch removable boom, and folding legs with rubber end caps.
Height adjusts from 32 to 61.5 inches, which suits standing vocals and seated instruments. The boom removes from the stand, so the MS7701B can work as a straight stand or pack flat for transport.
The included components cover the basics. The Amazon listing names a microphone clip, a cable, and a carrying bag in the box. The 5/8 inch thread fits standard microphone clips and shock mounts.
This stand is a budget pick in this group, and it shows in the height ceiling. It does not reach as high as the InnoGear or Amazon Basics stands, so very tall performers and overhead drum positions need a taller stand. It is also best with a light to medium microphone kept close to the centre.
Specs
| Specification | Details |
|---|---|
| Brand | On-Stage |
| Model | MS7701B |
| Base | Tripod with non-slip rubber feet |
| Height range | 32 to 61.5 inches |
| Boom length | 30 inches, removable |
| Thread | 5/8 inch |
| Weight | 5 pounds |
| Material | Steel |
| Included | Microphone clip, cable, carrying bag |
Cahaya CY0239 Tripod Microphone Stand
The Cahaya CY0239 is a value kit for singers, podcasters, and small venues that need a complete stand in one purchase. It adjusts from 25.2 to 62.2 inches, which covers seated and standing use, and the boom extends from 16.9 to 30.1 inches with 360 degree rotation for flexible microphone placement.
Two microphone clips ship in the box, in barrel and clothespin styles, plus a carrying bag and a 3/8 inch to 5/8 inch adapter. That is a useful combination when two people share one stand at different times, or when you want a spare clip for a second microphone.
The CY0239 is a budget pick, and its height ceiling sits below the tallest stands here. It is best for light to medium microphones and for rooms where the stand will be set up, used, and packed away again. For a heavy condenser microphone on a long boom, a heavier stand with a counterweight is a better match.
Specs
| Specification | Details |
|---|---|
| Brand | Cahaya |
| Model | CY0239 |
| Base | Tripod with non-slip foot pads |
| Height range | 25.2 to 62.2 inches |
| Boom length | 16.9 to 30.1 inches, telescopic |
| Thread | 3/8 inch, with 5/8 inch adapter |
| Weight | Not stated |
| Material | Not stated |
| Included | Carrying bag, 2 microphone clips, adapter, extension pole |
Samson MK10 Lightweight Microphone Boom Stand
The Samson MK10 is the portable pick in this guide. It is a lightweight tripod boom stand built from alloy steel, with a collapsible tripod base that folds up for transport. At 3.3 pounds, it is the lightest stand here, and it packs down small enough to carry in a bag with a microphone and a cable.
The Amazon description says the height adjusts from 28 inches upward, and the manufacturer cut sheet says the stand collapses to 25 inches in height for transport. A standard microphone clip is included in the box, and non-slip rubber feet add stability on hard floors.
This stand suits a home practice room, a small rehearsal, or a portable setup where the stand moves often and the microphone is light. It is a budget pick, and its shorter reach is the trade-off for the low weight. A tall performer, a heavy condenser microphone, or a long extended boom will push this stand past its comfort zone.
Specs
| Specification | Details |
|---|---|
| Brand | Samson |
| Model | MK10 |
| Base | Collapsible tripod with non-slip rubber feet |
| Height range | From 28 inches, maximum not stated |
| Boom length | Not stated |
| Thread | 5/8 inch |
| Weight | 3.3 pounds |
| Material | Alloy steel |
| Included | Standard microphone clip |
Amazon Basics TMS130 Microphone Boom Stand
The Amazon Basics TMS130 is the budget tall stand in this group. It reaches a maximum height of 85.75 inches on a foldable tripod base with a 21 inch base width. The long boom carries a molded plastic counterweight, which balances the microphone against the boom so the arm is less likely to droop and the stand is less likely to tip.
This stand is also the most honest about its limits. Amazon Basics states a maximum microphone weight of 1 kilogram, or 2 pounds. That covers almost every handheld dynamic microphone and many small condenser and USB microphones, and it tells you plainly when a heavier studio microphone needs a sturdier stand. A clip-on cable holder keeps the microphone lead from swinging, and a 3/8 inch to 5/8 inch adapter is included.
No minimum height or boom length is given in the listing, so measure your seated position before you rely on this stand for low work. For standing vocals and light microphones at height, it covers the basics without extras you will not use.
Specs
| Specification | Details |
|---|---|
| Brand | Amazon Basics |
| Model | TMS130 |
| Base | Foldable tripod, 21 inch base width |
| Height range | Maximum 85.75 inches, minimum not stated |
| Boom length | Not stated |
| Thread | 3/8 inch to 5/8 inch adapter included |
| Weight | 3.3 pounds |
| Material | Steel |
| Included | Clip-on cable holder, 3/8 inch to 5/8 inch adapter, microphone clip sold separately |
| Microphone weight limit | 2 pounds |
Who Should Skip a Floor Microphone Stand
A floor stand is not the right tool for every desk. If your microphone never leaves your desk and you want it close to your mouth without a tripod leg underfoot, a desk-clamp boom arm or a weighted desktop stand is a better fit.
Skip a light tripod stand if your microphone is heavy. A large-diaphragm condenser microphone, a microphone with a heavy shock mount, or a microphone plus a pop filter adds leverage at the end of the boom. In that case, choose a stand with a stated weight limit that covers your microphone, a counterweight, or a heavier base, and keep the boom as short as the setup allows.
Also skip a tall floor stand if you only record seated at a low desk. A short desktop stand or a low-profile floor stand will place the microphone correctly without a tall pole rising past your monitor.
Frequently Asked Questions
What is the difference between a microphone stand and a microphone boom arm?
A microphone stand is a freestanding floor stand with a tripod or weighted base, a height-adjustable pole, and often a detachable boom. A microphone boom arm clamps to a desk edge and swings the microphone into place. Stands work anywhere there is floor space, while boom arms need a suitable desk edge and stay fixed to one desk.
What size microphone can a floor stand hold?
It depends on the stand and the boom position. Light handheld dynamic microphones suit almost any stand in this guide. The Amazon Basics TMS130 states a limit of 2 pounds, which covers most handheld and small USB microphones. Heavier condenser microphones need a heavier stand, a counterweight, or a shorter boom.
Do microphone stands fit all microphones?
Most stands use a 5/8 inch thread, with a 3/8 inch adapter for European clips and shock mounts. That covers most handheld, USB, and studio microphones that use a standard clip or shock mount. Check the thread on your clip before you buy, and confirm whether the stand includes a clip, because some stands ship without one.
How do I stop a microphone stand from tipping over?
Set one tripod leg under the boom so the microphone weight sits over a leg rather than between two legs. Keep the boom as short as the setup allows and tighten the clutch before each session. For a heavy microphone, choose a stand with a counterweight or a wider, heavier base.
Conclusion
The best microphone stand is the one that matches your microphone, your height, and your room. The InnoGear TS186 covers the widest range of jobs, from seated podcasting to standing vocals, and its bag and two clips make it ready to travel. The On-Stage MS7701B is the proven stage classic for singers who want a simple steel tripod that packs flat. The Cahaya CY0239 is the value kit for a complete setup in one purchase, and the Samson MK10 is the lightest choice for portable use.
For a tall stand on a tight budget, the Amazon Basics TMS130 reaches 85.75 inches and states its 2 pound microphone limit plainly. Whichever stand you choose, check the height range at both ends, confirm the thread and the clip in the box, and set a tripod leg under the boom before you record.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.